Samson S-com 4 Pro Stereo Compressor/Limiter - 4 Channels is a compact and versatile single-rack space device that provides four channels of high quality dynamics processing with an Expander/Gate and Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED metering displays input/output level as well as gain reduction. The Expander/Gate section features a continuously variable Threshold control as well as a switch for fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels. S com 4's Enhancer switch restores high frequencies that are sometimes diminished by heavy compression. This wide-ranging combination of features makes the Samson S-com 4 Pro Stereo Compressor/Limiter - 4 Channels an efficient and versatile audio tool for a wide variety of applications. Its clean and quiet audio characteristics make it ideal where high sonic integrity is imperative.
System Specifications Frequency Response: 20Hz to 20kHz + - 0.5 dB Dynamic range: 95 dBu un-weighted 22 Hz to 22 kHz THD: 0.008 % typ. @ +4 dBu 1 kHz Crosstalk: 90dB 22 Hz to 22 kHz Detector: RMS Expander/Gate Trigger range: variable (Off to +10 dB) Attack: Auto variable Release: Auto variable (Slow:100 ms / 1dB Fast:100 ms/100 dB) Compressor Section Threshold: -40 dB to +20 dB Ratio variable: (1:1 to 1: ) Auto Attack Time: variable (0.3 ms / 20 dB to 300 ms / 20 dB) Auto Release Time: variable (0.05 to 5 Sec) Output gain: variable (-20 to +20 dB) Function Switches Gate: Gate or Expander Release: Fast/slow Enhancer: In/Out I/O Meter: Switches the Input/Output meter to read input or outputlevel . Stereo Link: Linking two channels for stereo operation. Channel 1becomes master for Channel 2. Channel 3 becomesmaster for Channel 4. Operating Level: Changes the internal reference level from-4 dBu to -10dBV. Meters & LED's Gain Reduction: 5 segment LED display :-24/-12/-6/-4/-2 dB Input/Output level: 5 segment LED display: -18/-6/0/+6/+9 dB Auto Open/Closed: 2 LED's under and over signal window Function switch: LED indicator in each Audio Input Connectors: XLR and 1/4 TRS jack Impedance: 20k Ohm balanced 10k Ohm unbalanced Nominal Operating Level: Selectable +4dBu/-10 dBV Max. Input Level: +21 dBu balanced and unbalanced CMRR: Typ. 40dB >55dB @ 1kHz Audio Output Connectors: XLR and 1/4 jack Impedance: 60 Ohms balanced 30 Ohms unbalanced Max. Output Level: +21 dBu balanced and unbalanced Power Supply Mains Voltages/selectable: USA/Canada ~120 V AC 60 Hz Power Consumption: 5 Watts Power inlet: Standard IEC receptacle/with fuse Size Dimensions: 1 3/4 (44.5 mm)H x 19 (482.6 mm) x 7 3/4 (216 mm) Weight Net Weight: 5.25 lbs. (2.4 kg) Shipping Weight: 7.5 lbs. (3.4 kgs)
4 Channel Compressor/Limiter Expander/Gate with Enhancer Linkable in two Stereo pairs Expander/Gate with variable Trigger control and switchable Fast/Slow Release 5 Segment LED meters for Input/Output levels and Gain Reduction on each channel Advanced circuit design utilizing Low Noise Operational Amplifiers and High Quality VCA's Servo Balanced Inputs and Outputs on XLR and 1/4 connectors SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee based on the level of Input signal applied Individual Threshold and Ratio controls on each channel Three-year extended warranty