Samson Pro S-Com Plus Stereo Compressor/Limiter - 2 Channels can now be used in your church The S com plus is a highly adaptable stereo compressor/limiter in an efficient single rackspace design. It is intended for situations where extra flexibility is required to optimize signal levels. It delivers essential control along with simplicity of operation. Samson Pro S-Com Plus Stereo Compressor/Limiter - 2 Channels comprehensive and wide-ranging controls provide extensive manipulation of audio dynamics, even in the most complex situations.
Each channel features a wide range of variable control. A feature-rich Compressor section includes variable Threshold, Ratio, Attack and Release controls. Samson's SKD (Smart Knee Detector) circuit dynamically adjusts the compression curve to ensure a musical result. Our exclusive AEG (Auto Envelope Generator) function simplifies optimum settings by constantly analyzing the audio input and automatically adjusting the attack and release parameters based on the changing level. Key Inputs and Outputs are included for externally processing the control voltage.
The Expander/Gate features a variable threshold level and switchable release time (fast or slow). The Gate switch changes the downward expander ratio from "light" to "hard" gating for control ranging from subtle to an obvious effect. A dedicated Peak/Limiter with variable control provides protection against peak and overload independently of the compressor. When used in combination with the Compressor the Peak/Limiter offers even more precise control over dynamic levels.
A functional De-esser improves audio quality by removing "S" from vocals and sibilance from overly bright signal sources such as cymbals. The Enhancer switch engages the EFR (Enhanced Frequency Recovery) circuit, which restores high frequencies that are sometimes diminished by heavy compression. Extensive metering includes Input/Output, Gain Reduction, De-esser Level, Gate Open/Close and Limit.
System Specifications Frequency Response: 100kHz Dynamic range: 116 dB un-weighted 22 Hz to 22 kHz THD: 0.008 % typ. @ +4 dBu 1 kHz Effect out 0.016% effect in Crosstalk: >100dB 22 Hz to 22 kHz Operating Level: Selectable +4dBu / -10 dBV Max. Input Level: +21dBu balanced CMRR: Min. 40dB >50dB @ 1kHz Max. Output Level: +21dBu balanced Balanced Input Connectors: XLR and 1/4 TRS jack Impedance: >20K Ohms balanced or unbalanced Balanced Output Connectors: XLR and 1/4 TRS jack Impedance: 60 Ohms balanced or unbalanced Key Input Connector 1/4 jack Impedance: 10 k Ohm Max. Input Level: +21 dBu Key Output Connector: 1/4 jack Impedance: 47 Ohms Max. Output Level: +21 dBu Expander/Gate Trigger range: Variable (Off to +10 dB) Attack: Release: Variable (Slow:100 ms / 1dB Fast:100 ms / 100 dB) Ratio: Expander 1:2 Gate 1:16 Compressor Section Detector: RMS Threshold: -40 dB to +20 dB Ratio: Variable (1:1 to infinity : 1) Manual Attack Time: Variable (0.3 ms / 20 dB to 300 ms / 20dB) Manual Release Time: Variable (0.05 to 5 Sec) Output gain: Variable (-20 to +20 dB) Peak Limiter Section Threshold: Variable 0 to Off Ratio: Preset Limiter: Ceiling type Attack: Release: Typ. 20dB/s De-Esser Trigger range: variable (off to 12dB) Maximum: 12dB Gain Reduction mid / high band Function Switches Gate: Gate or Expander Release: Fast/slow Enhancer: In/Out In/Out: Bypass Key: Switches the detector section to external key input Auto: Sets automatic attack and release times and automated timing - program dependent I/O Meter: Switches the Input/Output meter to read input or output level De-Esser: In/Out Stereo Link: Links both channels for stereo operation. Channel 1 becomes master. Operating Level (Rear Panel): Changes the internal reference level from +4dBu to -10dBV Meters & LED's Gain Reduction: 12 segment LED display: 30 / 27 / 24 / 21 / 18 / 15 / 12 / 9 / 6 / 4 / 2 / 1dB Input/Output level: 12 segment LED display: -30 / -24 / -18 / -12 / -6 / -3 / 0 / +3 / +6 / +9 / +12 / +18dB Expander/Gate Threshold: 2 LED's Gate open Gate closed Peak Limiter Threshold: 1 LED for Indication of Limiter function Function switch: LED indicator in each (except 0perating Level Switch) Power Supply Mains Voltages: USA/Canada 105 - 125 VAC ~ 60 Hz Power Consumption: 10 Watts Power inlet: Standard IEC receptacle/with fuse Physical Dimensions: 1 3/4 (44.5 mm) x 19 (482.6 mm) x 7 3/4 (197 mm) Net Weight: 5lbs. (2.3 kg) Shipping Weight: 7.5lbs. (3.4 kg)
Compressor/Limiter Expander/Gate De-Esser with Peak Limiter Expander/Gate with Variable Trigger Control and Switchable Fast/Slow Release Peak Limiter with Independent Threshold Control and Peak LED Adjustable De-Esser with independent LED Meter for Reducing Sibilance Advanced Circuit Design Utilizing Low Noise Operational Amplifiers and High Quality VCA's Servo Balanced Inputs and Outputs on XLR and 1/4 Connectors SKD (Smart Knee Detector) Circuit Switches from Soft to Hard Knee Based on the Level of Input Signal Applied AEG (Auto Envelope Generator) Mode Constantly Adjusts the Compressors Attack and Release Times Three-year Extended Warranty