Nady VHF Quad Wireless System

Nady's VHF quad microphone systems give you 4 microphones each operating on their own VHF frequency in one compact unit!
These are VHF systems, independent channels operate on factory installed frequencies between frequency range 170-230MHz.
Availability: Will arrive in 7-10 Business Days
SKU
KN4QUADA
Image
SKU
Product
Price
Qty
Nady VHF Quad Handheld Wireless System
Nady VHF Quad Handheld Wireless System
KN4QUADH
Nady VHF Quad Handheld Wireless System
Regular Price $339.99 Special Price $269.99
Nady VHF Quad Lapel Wireless System
Nady VHF Quad Lapel Wireless System
KN4QUADL
Nady VHF Quad Lapel Wireless System
Regular Price $339.99 Special Price $269.99
×

Nady's VHF quad microphone systems give you 4 microphones each operating on their own VHF frequency in one compact unit!

The hand held unit (KN4QUADH) has 4 handheld unidirectional microphone transmitters with a neodymium dynamic cartridge for premium true sound, maximum feedback rejection and minimal handling noise.

The lapel unit (KN4QUADL) has 4 unidirectional lapel microphones that is ideal for speaking applications or radio communications.

These are VHF systems, independent channels operate on factory installed frequencies between frequency range 170-230MHz.




More Information
SKU KN4QUADA
Availability Will arrive in 7-10 Business Days
MPN 401x Quad
Technical Specifications
  • Frequency Response: 30-18KHz (-3dB)
  • Dynamic Range: 120dB (20-20KHz)
  • Total Harmonic Distortion: <0.5% (typical)
  • RF Carrier Frequency Range: 170- 230MHz (Factory installed Channels)
  • Frequency Stability: 0.005%, crystal controlled
  • Modulation: FM (F3E), +/- 15KHz nor, +/-30KHz max
  • Operating Range: 250 feet typical - up to 500+ feet optimum line-of-sight

 

Transmitter Specifications:

 

  • Handheld: OFF/STANDBY/ON switch
  • Lapel: OFF/STANDBY/ON switch, input level adjust
  • LED Indicator: Unit "ON" (single flash), Low Battery Alert (steady)
  • RF Power Out: 50mW (Max. allowed by FCC)
  • Harmonic & Spurious Emissions: <-40dB
  • Battery: 9V
  • Alkaline Battery Life: Up to 20 hours

 

Receiver Specifications:

  • Controls: Power ON/OFF, volume control, mute control\
  • Connectors: 1 unbalanced adjustable mixed (all four channel), +/- T-S audio output jack. Line level, 600 ohms, 4 balanced fixed level XLR.  #1=GND, #2-3=signals Line/Mic level, 11k/600 ohms
  • Receiver: 2.1mm barrel-type DC input jack (tip=positive)
  • LED Indicators: 1 Power ON LED, 4 AF LED, 4 TX ON LED
  • Power Requirements: 16V @ 800mA, nominal, AC/DC adapter supplied
  • Antenna Connectors: Dual female BNC connectors

FCC Alert Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.

Dimensions N/A
Features

System Features:

  • Four independent VHF receivers in one convenient, rugged, all-metal single-rack space housing
  • Front dual antenna jacks for either onboard or remote antennas
  • Front panel Power On/Off switch, plus Power On LED, TX On and AF signal level LED displays
  • Rear panel individual XLR output jacks; volume and RF mute controls for each of the four channels; 4-channels-mixed AF out
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!