Audio-Technica AEW-4110AC Wireless Body-Pack System

If your worship service demands incredible audio quality and proven performance, this frequency-agile true diversity wireless microphone is for you.

Availability: Will arrive in 7-10 Business Days

Designed for professional use in concert halls, stadiums, and other demanding environments!

You get your choice of a professional handheld wireless microphone or a pro body pack which can be used with a lavalier, headset microphone or instrument such as a guitar (all sold separately). 200 selectable channels are offered in both UHF systems. Receivers may also be linked to form a complete system in which the built-in IntelliScan automatically determines and sets the best available frequencies on all linked receivers. 

More Information
Availability Will arrive in 7-10 Business Days
Technical Specifications


    Operating Frequencies UHF band
Band C: 541.500 to 566.375 MHz
Band D: 655.500 to 680.375 MHz

Number of Channels 200 total per band
Frequency Stability ¦0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Normal Deviation ¦5 kHz
Operating Range 300' typical
Operating Temperature Range 41¦ F (5¦ C) to 113¦ F (45¦ C)
Frequency Response 70 Hz to 15 kHz    
    Receiving System Dual independent RF sections, automatic-switching diversity
Image Rejection 60 dB typical
Signal-to-noise Ratio 115 dB at 40 kHz deviation (IEC-weighted, 75 kHz maximum modulation)
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 20 dB¦V (S/N 70 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency 65.75 MHz, 10.7 MHz
Audio Output - Microphone (ATTN switch at ""0"")
25 mV (at 1 kHz, ¦5 kHz deviation, 10k ohm load)

Audio Output - Instrument (ATTN switch at ""0"")
50 mV (at 1 kHz, ¦5 kHz deviation, 10k ohm load)

Audio Output Attenuator (ATTN) Three-position switch: 0 / -6 / -12 dB
Output Connectors (Microphone) XLRM-type (balanced)
Output Connectors (Instrument) 1/4"" (6.3 mm) TS unbalanced phone jack
Headphone Output Connector: 1/4"" (6.3 mm) TRS (""stereo"") phone jack
Power Output: 10 mW + 10 mW at 1 kHz, ¦5 kHz deviation into 32 ohms; maximum output, 220 mW + 220 mW into 32 ohms.

Antenna Power DC 10V-12V, 20 mA (BNC-type jack)
Power Supply 100-240V AC 50/60 Hz; 8W
Dimensions 8.31"" (211.0 mm) W x
1.74"" (44.0 mm) H x
9.26"" (235.0 mm) D

Net Weight 3.8 lbs (1.7 kg)
Accessories Included Detachable IEC-type AC power cable; two flexible UHF half-wave antennas; link cable; rack-mount adapters    
    RF Power Output High: 35 mW; Low: 10 mW, nominal
Spurious Emissions Under federal regulations
Microphone Dynamic Range >=110 dB, A-weighted
Instrument Dynamic Range >=100 dB, A-weighted
Input Connections High impedance, low impedance, bias
Batteries Two 1.5V AA alkaline (not included)
Current Consumption High: 185 mA; Low: 165 mA, typical
Battery Life Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
Dimensions 2.60"" (66.0 mm) W x
3.43"" (87.0 mm) H x
0.94"" (24.0 mm) D

Net Weight 4.4 oz (125 g)
Dimensions N/A
200 available UHF frequencies
Intelliscan finds the clearest signal for you
Tough, metal chassis
Rack mountable
LCD information display
XLR and 1/4"" outputs
Transmitters use 2 AA batteries (sold separately)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!