Audio-Technica 10-channel UHF Wireless Mic System - Headset - Beige

This wireless microphone system automatically finds and selects a crystal clear frequency
Wireless system designed to suit a variety of applications.

Availability: Ready to Ship

Audio-Technica 10-channel UHF Wireless Mic System - Headset - Beige automatically finds and selects a crystal clear frequency!
Audio-Technica's innovative 2000 Series headset wireless system delivers professional performance at an incredible price. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable. Automatic frequency scanning finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout any of its 10 channels may be used together-eliminating confusing frequency groups and other frequency-coordination problems. True Diversity operation reduces dropouts by selecting the better signal from the two receiver sections. Audio-Technica's Tone LockÖ squelch system fights interference. If you're looking for dependable performance and great sound quality order the Audio-Technica 10-channel UHF Wireless Mic System - Headset - Beige today!

More Information
Availability Ready to Ship
Technical Specifications

Overall System Specifications
Operating Frequency: 656.125 to 678.500 MHz
Number of Channels: 10 total
Frequency Stability: ¦0.005% Phase Lock Loop frequency control
Modulation Mode: FM
Normal Deviation: ¦5 kHz
Operating Range: 300' typical
Operating Temperature Range: 41¦ F (5¦ C) to 113¦ F (45¦ C)
Frequency Response: 100 Hz to 15 kHz
Receiver Specifications
Receiving System: Dual independent RF sections automatic-switching diversity
Image Rejection: 55 dB nominal 50 dB minimum
Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted) maximum modulation 40 kHz
Total Harmonic Distortion: Sensitivity: 20 dB¦V (S/N 60 dB at 5 kHz deviation IEC-weighted)
Intermediate Frequency: 65.75 MHz 10.7 MHz
Audio Output: Unbalanced: 25 mV (at 1 kHz ¦5 kHz deviation 100k ohm load); Balanced: 12.5 mV (at 1 kHz ¦5 kHz deviation 100k ohm load)
Output Connectors: Unbalanced: 1/4 (6.3 mm) phone jack; Balanced: XLRM-type
Power Supply: 120V AC 60 Hz or 12-18V DC 350 mA with external supply
Dimensions: 8.27 (210.0 mm) W x 1.73 (44.0 mm) H x 6.39 (162.2 mm) D
Weight: 2.2 lbs (1.0 kgs)
Accessories Included: Two flexible UHF antennas rack-mount adapters AC adapter
Bodypack Transmitter Specifications
RF Power Output: 12 mW
Spurious Emissions: Under federal regulations
Input Connections: High impedance low impedance bias
Batteries: Two 1.5V AA alkaline (not included)
Current Consumption: 150 mA typical
Battery Life: Approximately 9 hours (depending on battery type and use pattern)
Dimensions: 2.60 (66.0 mm) W x 3.63 (92.3 mm) H x 0.89 (22.5 mm) D
Net Weight: 2.82 oz (80 g)
Headset Microphone
Element: Condenser
Polar Pattern: Omnidirectional
Frequency Response: 20-20000 Hz
Open Circuit Sensitivity: û44 dB (6.3 mV) re 1V at 1 Pa
Maximum Input Sound Level: 122 dB SPL 1 kHz at 1% T.H.D.
Signal-to-Noise Ratio: 60 dB 1 kHz at 1 Pa
Power Requirements: Voltage Range: 2.5-11V; Current Consumption: 0.1 mA typical @ 5V
Weight: Microphone boom & earpiece: 0.08 oz (2.4 g)
Dimensions: Microphone: 0.32 (8.1 mm) long 0.11 (2.7 mm) diameter; Boom: 3.87 (98.4 mm) long 0.042 (1.07 mm) boom diameter
Cable: 55 (1.4 m) beige terminated with locking 4-pin connector for A-T UniPak™ body-pack wireless transmitter
Accessories Furnished: Two windscreens; two element covers; clothing clip; moisture guard; carrying case




Serious advances in affordable professional wireless
Clear sound quality and rock-solid dependable performance
Automatic frequency scanning finds an open channel at the touch of a button
All 10 user-switchable channels are compatibleùfor easy use with multiple systems; no confusing frequency groups
True Diversity operation selects the better signal from the two receiver sections reducing dropouts
Tone Lock™ tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4ö output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account