System Specifications
Frequency Response: 20Hz to 20kHz + - 0.5 dB
Dynamic range: 95 dBu un-weighted 22 Hz to 22 kHz
THD: 0.008 % typ. @ +4 dBu 1 kHz
Crosstalk: 90dB 22 Hz to 22 kHz
Detector: RMS
Expander/Gate
Trigger range: variable (Off to +10 dB)
Attack: Auto variable <1 ms per 50 dB
Release: Auto variable (Slow:100 ms / 1dB Fast:100 ms/100 dB)
Compressor Section
Threshold: -40 dB to +20 dB
Ratio variable: (1:1 to 1: )
Auto Attack Time: variable (0.3 ms / 20 dB to 300 ms / 20 dB)
Auto Release Time: variable (0.05 to 5 Sec)
Output gain: variable (-20 to +20 dB)
Function Switches
Gate: Gate or Expander
Release: Fast/slow
Enhancer: In/Out
I/O Meter: Switches the Input/Output meter to read input or outputlevel .
Stereo Link: Linking two channels for stereo operation. Channel 1becomes master for Channel 2. Channel 3 becomesmaster for Channel 4.
Operating Level: Changes the internal reference level from-4 dBu to -10dBV.
Meters & LED's
Gain Reduction: 5 segment LED display :-24/-12/-6/-4/-2 dB
Input/Output level: 5 segment LED display: -18/-6/0/+6/+9 dB
Auto Open/Closed: 2 LED's under and over signal window
Function switch: LED indicator in each
Audio Input
Connectors: XLR and 1/4 TRS jack
Impedance: 20k Ohm balanced 10k Ohm unbalanced
Nominal Operating Level: Selectable +4dBu/-10 dBV
Max. Input Level: +21 dBu balanced and unbalanced
CMRR: Typ. 40dB >55dB @ 1kHz
Audio Output
Connectors: XLR and 1/4 jack
Impedance: 60 Ohms balanced 30 Ohms unbalanced
Max. Output Level: +21 dBu balanced and unbalanced
Power Supply
Mains Voltages/selectable: USA/Canada ~120 V AC 60 Hz
Power Consumption: 5 Watts
Power inlet: Standard IEC receptacle/with fuse
Size
Dimensions: 1 3/4 (44.5 mm)H x 19 (482.6 mm) x 7 3/4 (216 mm)
Weight
Net Weight: 5.25 lbs. (2.4 kg)
Shipping Weight: 7.5 lbs. (3.4 kgs)