With 800 watts per channel in stereo mode and 1600 watts in bridged mode the PMP4000 will give you maximum power for your speakers and with 16 channels (8 which are XLR) you have all the inputs you need to meet you demands!
These Class D amps have a lightweight power supply that reduces weight and heat. Keeping it cool and easy to move when needed. Behringer uses high quality XENYX mic Preamps for superb sound reproduction. An amp mode switch allows you to run stereo, bridged, or to power your monitors through one channel and your mains through the other. This allows the mixer to be very versatile for any setup.
On board 24-bit FX processor, with 100 digital effects. Switchable +48v Phantom power for condenser mics. Behringer also includes FBQ feedback detection. Turn this on and the problem frequencies will light up on the 7 band EQ. This allows you to adjust those frequencies to get your feedback under control. RCA in/outs for recording and playback. There is a voice canceller feature on the RCA line in which can eliminate vocals from pre-recorded music(this feature may vary in results, depending on how original music was recorded). Behringer has made the PMP series with everything you need and even added some things you did not realize you needed for a mixer that serves any setup, from portable to a small installed Pa system.