Free Shipping on orders over 50$

QSC KW152 2-Way Powered Speaker 15 inch - 1000 watts

QSC KW152 2-Way Active Speaker 15 inch - 1000 watts is lightweight and boasts great room coverage and will work great if you are just getting started- or for an already established sound system!

Availability: Available For Order

QSC KW152 2-Way Powered Speaker 15 inch - 1000 watts

More Views


QSC KW152 2-Way Powered Speaker 15 inch - 1000 watts offers the great technology of their K series in a smaller and lighter cabinet! Great sound for beginners and PROS!

QSC KW152 2-Way Active Speaker 15 inch - 1000 watts has incorporated internal signal processing allowing the speaker to equally produce audio across your entire sound field.
Starting with a 1000 watt continuous power, from the internal class D amp, the QSC KW152 offers a 15" woofer and a 1.75" diaphragm compression driver horn.  Their Directivity Matched Transition (DMTÖ) takes low frequencies and high frequencies and matches them to help remove hot zones or dead zones in your audio.Internal amp protection keeps the amp protected from unwanted clipping. QSC also uses their DEEPÖ feature which boosts your low end with out taking away from your other sound layers.

QSC KW152 2-Way Active Speaker 15 inch - 1000 watts
' combination XLR and 1/4" TRS inputs will allow both mic and line level inputs. A set of RCA phono inputs allows for use of MP3 players, CD Players and other line level input devices. 3 audio sources can be mixed and sent through a output for sending to other attached speakers. Included on board EQ switch allows High Frequencies to be set to Vocal Boost for added presence to voice, or Flat for a natural sound. The Low frequencies can be set to NORM, DEEPÖ for added bass response, or EXT SUB for use with a QSC KW152 2-Way Active Speaker 15 inch - 1000 watts subwoofer. LED switch on the rear can be set to illuminate the front LED or allow it to be turned off if so desired, or set to limit which will show the operator when the signal is clipping internally.The speaker mounting hole allows for 7.5¦ of downward tilt to focus audio more on the audience if needed. All this sound technology with quality constructed baltic birch cabinets, aluminum handles, and integrated M10 suspension points for hanging. The QSC KW152 Powered Speaker 15 inch - 1000 watts will fill any sound need for any application.

Additional Information

Manufacturer QSC
Technical Specifications "Configuration - 15"" 2 way trapezoidal

Transducers -
       Low frequency - 15 "" cone transducer
       High frequency - 1.75"" diaphragm compression

Frequency response (-6dB) -  47Hz - 18kHz

Frequency range (-10dB) -   44Hz - 20 kHz

Nominal coverage (-6dB) - 60¦ axisymmetric

Maximum SPL - 133 dB peak

Power Output 1000 W Class D (500 W LF, 500 W HF) continuous
2000 W peak

Input Impedance (ohms) Channel A XLR / +"":
Mic gain setting Balanced Unbalanced
0 dB 38k 19k
+12 dB 10k 5k
+24 dB 2.66k 1.33k
+36 dB 660 ohms 330 ohms

Channel B XLR / +"": 38k balanced / 19k unbalanced
Channel B RCA:

Controls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEPÖ), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)

Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)

Connectors Balanced female XLR/+"" line/mic level input, Balanced female XLR/+"" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR ""mix"" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector

Cooling On demand, 50 mm variable speed fan

Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRailÖ

Transducer Protection Thermal limiting, excursion limiting

AC Power Input

Universal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A


Material  -  15mm painted birch plywood

Finish  -  Black textured paint

Grille  -  Black powder coated 16 gauge steel

Dimensions (HxWxD) - 32.1""x17.5""x15.2""

Weight - 64lb

Dimensions N/A
Features "ò 1000 watt Class D amplifier (2 x 500 Watt cont)
ò Extensive DSP featuring DEEPÖ and Intrinsic CorrectionÖ enhances performance
ò DMTÖ (Directivity Matched Transition) ensures uniform coverage across sound field
ò Rugged, texture painted birch enclosures
ò Four position mic/line gain
ò 16 gauge steel grilles
ò ergonomic handles
ò 35 mm speaker mount holes, with 7.5¦ of tilt
ò M10 rigging points for hanging


Click here to chat!