JBL does it again! Bringing you incredible quality and revolutionary technology to make your job easier and make your audio sound better.
We have here the JBL PRX735 3-Way Powered Speaker. With this powerhouse full range speaker system, you don't just get a 15" woofer and 1.5" neodymium tweeter, but you also get a 6.5" horn. This means that whether you're a DJ, a sound man for a church, coffee shop, or professional venue, every frequency will come through your speakers so crystal clear you'll be a JBL fan for life. They designed these speakers with waveguide technology to give you accurate coverage and premium audio quality. You get 1500-Watts of power and a massively wide frequency range of 34Hz-20kHz which gives you an astounding amount play and headroom. The PRX735 speakers are equipped with a Class-D amplifer so your speaker system is lighter, cooler, and far more efficient than other classes. These speakers have a built in DSP unit, crossover, dynamic limiting, component optimization, and selectable EQ so you'll have ultimate control over your sound. It's time to crank it up and see where the PRX735 can take you.
1500W 15" three-way powered loudspeaker system
Active or Passive Active Design Bass reflex Frequency Response -10 dB normal: 35 to 20,000 Hz -10 dB boost: 34 to 20,000 Hz
±3 dB normal: 42 Hz to 20,000 Hz ±3 dB boost: 39 to 20,000 Hz Coverage Pattern 90° x 50° nominal Directivity Index: 10.5 dB Factor: 11.2 Amplifier Class D Power Capacity 1500 W Maximum Sound Pressure Level (SPL) Normal: 136 dB Boost: 136 dB Crossover 480 Hz (DSP Active) 2,000 Hz (DSP Active) Input Impedance 20,000Ω (balanced) 10,000Ω (unbalanced) Low Frequency Driver 1 x 15" DifferentialDrive low-distortion, low-frequency woofer with ferrite magnet Mid Frequency Driver 1 x 6.5" horn loaded midrange transducer High Frequency Driver 1 x 1.5" neodymium compression driver with annular polymer diaphragm and waveguide DSP Dynamic control: dbx type IV limiter circuit Signal Indicator Limit: yellow LED indicates peak output and active DSP limiting Signal: green LED indicates signal presence Power/standby: blue LED indicates powered Power/standby: red LED indicates power saving mode Enclosure Material Trapezoidal 18 mm poplar plywood with DuraFlex finish Input Connections 2 x combo balanced 3-pin XLR female and 1/4" inputs 2 x unbalanced RCA inputs Output Connections 1 x balanced 3-pin XLR male output Suspension Support 12 x M10 suspension points Mounting 1 x 36 mm pole socket Transport and Storage 2 x integrated handles with injection molded backing cup Dimensions 37.50 x 17.52 x 21.18" (952.50 x 445.00 x 538.00 mm) Weight 77.0 lb (34.9 kg)