The Peavey VSX™ 26 Loudspeaker Management System helps you take control of your sound management!
The Peavey VSX™ 26 includes 27-band Graphic EQ Autograph® algorithm for automatic EQ settings, Compressor/Limiter, Delay per-input. It also has Crossover/Bandpass filter (Butterworth, Bessel, Linkwitz-Riley), Parametric EQ (5-band, HP, LP Notch, Horn EQ, All-Pass), Compressor/Limiter, Delay with polarity inversion on every output. Plus it has a built in signal generator.
48 kHz sample rate, 24-bit 256x over-sampled Delta-Sigma AD, DA USB A & B ports for memory storage and computer interface (PC and Mac) XLR inputs and outputs, AES-EBU digital input +24 dBu inputs and outputs Phantom power +48 volt Built-in signal generator (white, pink, sine) Easy preset and system updates via Internet Fully adjustable crossover points Easy-to-read LCD screen Features per input: 27-band Graphic EQ Autograph® algorithm for automatic EQ settings, Compressor/Limiter, Delay (340 ms) Features per output: Crossover/Bandpass filter (Butterworth, Bessel, Linkwitz-Riley), Parametric EQ (5-band, HP, LP Notch, Horn EQ, All-Pass), Compressor/Limiter, Delay with polarity inversion 2 input/6 output loudspeaker DSP management system
Audio Channels - 3 inputs/6 outputs - RTA Mic input can be summed with Line inputs. LED Metering - 2 inputs/6 outputs - LED STATUS: Red = -0.5 dBFS and higher (Clip) - Red & Green = -4 to -0.5 dBFS - Green = -4 to -40 dBFS - Off = below -40 dBFS Mute Function - Front panel switch and LED for each input and output - LED STATUS: Red = Muted - Off = On ANALOG INPUTS Input Trim Range - -6 to +6 dB - Software Controlled Line Sens Setting - +24 dBu or -10 dBV - Software Selectable Line Input Impedance - 4.4 kohms - Electronically balanced Line Max In - 24 dB Line Input CMRR - 55 dB Line Input Crosstalk - -90 dB Line Input Dynamic Range - 110 dB A-weighted - 150 ohm input termination RTA Mic Gain Range - +20 to +60 dB - Approximately 1/2 dB steps RTA Max In - +2 dBu (0.98Vrms) - Gain - 60 dB, 22K BW RTA Input Impedance - 2.2 k ohm - electronically balanced RTA Input CMRR - 55 dB RTA Phantom Power - +48 nolts - Software Controlled AES Input - On XLR 1 - Software selectable between left channel analog line input OUTPUTS Output Full Scale - +24 dBu - Balanced Output Impedance - 150 ohms - Electronically balanced Minimum Load Impedance - 600 ohms - Maximum output @ 600 ohms = 22.5 dBu Dynamic Range - 105 dB - A-weighted ANALOG INPUT-TO-OUTPUT Total Harmonic Distortion (+ noise) - 0.007% - 20 Hz to 20 kHz, 22 kHz BW filter, +4 dBu signal with 20 dB headroom Frequency Response - 20 Hz to 20 kHz - +/- 0.5 dBr reference at 1 kHz Dynamic Range - 105 dB - A-weighted, 150 ohm input termination Latency - < 1 mS - Propagation delay from input to output DIGITAL Sample Rate - 48 kHz - QUANTIZATION 24-bit 256 x-over-sampled Delta-Sigma AD, DA Digital Processing - ~100 32-bit MIP - Uses Analog Devices BLACKFIN processors, 40-bit accumulators DSP Cylce Speed - 500 MHZ CONTROL/MEMORY USB - 2.0 PC, Memory Stick, PDA Connection GENERAL AC Power Input Voltage - 100 ~ 240 VAC - 47 ~ 63 Hz Universal Power Supply Power Consumption - 14 watts @ 1120 V - 163 mA Power Dissipation - 47 Btu (11.8 kcal) - @ 120 V Agency Compliance Listings - UL, CUL, CE, FCC part 15, Class B - Pending