Free Shipping on orders over 50$

Peavey PVXp Sub Powered Subwoofer 15 inch 800 Watts

Up to 800 Watts of Peak Power!

Availability: Available For Order

Peavey PVX®p Sub

More Views


The Peavey PVXp Powered Sub offers up to 800 watts peak power!

It as a 15" heavy-duty woofer with a 3" voice coil and provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. This sub adds the extra sound you need to your performances.

Additional Information

SKU PV1187
Manufacturer Peavey
MPN 03611330

15" heavy-duty woofer
Internal line level low-pass/high-pass crossover network
Fully adjustable KOSMOS® C for increased bass impact
XLR/one quarter inch combo jack input
Power amp has forced air cooling for maximum reliability
Large heavy-duty locking casters
Perforated steel grill
Steel handles
T-nut woofer mounting
Rugged dado and rabbet construction plus internal braces for lightweight yet strong cabinet
850 watts peak available power
Compact dimensions for a 15" woofer based sub
Threaded pole for top speaker mount
Two high-pass XLR outputs, one full range thru XLR output

Technical Specifications

Frequency Range (-10 dB, Half Space): 43 Hz – 180 Hz*
        * Crossover Control Full CW
Frequency Response, 1 Meter On-axis, Swept-sine In Anechoic Environment (-6 dB): 48 Hz – 138 Hz*
        *Crossover Control Full CW
Power Amp Rating, Total Power Output: 800 watts peak available power
Continuous Power: 470 watts into 4 ohms
Electronic Input Impedance (Nominal): Line In: 2.2 k ohms balanced (XLR or 1/4"), 10 k ohms unbalanced 1/4"
Sound Pressure Level, 1 Watt, 1 Meter In Anechoic Environment: 97 dB SPL
Maximum Sound Pressure Level (1 meter): 123 dB SPL continuous 127 dB SPL peak
Transducer Complement: 15" premium heavy-duty woofer, 3" voice coil
Box Tuning Frequency: 50 Hz
Input Connections: One combo female XLR/ 1/4" phone jack providing balanced or unbalanced operation.
Output Connections: Two High Pass Outputs, independently electrically buffered, with switchable output level pad. One Full Range Thru, electrically buffered.
Controls: Level: Provides +/- 20 dB gain adjustment
Crossover Frequency Adjust: Adjusts electrical crossover frequency from 90 Hz to 180 Hz, continuously variable.
Kosmos® C: Provides bass enhancement processing.
Polarity Switch: Provides either 0 degrees or 180 degrees sub woofer polarity
Ground Lift Switch: For input Electronic Crossover Continuously variable from 90 Hz to 180 Hz.
Low Pass slope: 24 dB/octave
High Pass Output slope: 18 dB/octave
Infrasonic Filter Slope: 36 dB/octave
Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz
Hum and Noise: Greater than 90 dB below rated power
DDT Dynamic Range: Greater than 21 dB
THD and IM: Typically less than 0.5 %
Damping Factor: Greater than 100 @ 1000 Hz, 4 Ohms
Power Requirements Of Peavey PVX™p Sub System: Nominal 160 Watts, 100-120 VAC 50-60 Hz (Domestic) 220-240 VAC 50-60 Hz (Export)
Enclosure Materials & Finish: Black acrylic painted enclosure with 15 mm MDF, with a full-length, black powder coated perforated steel grille.
Mounting Provisions: 1 3/8" pole mount with M20 threaded pole for stand mounting a suitable speaker on top of the Sub, and four large rubber feet on bottom for floor use.


Weight Packed: 83.77 lb(38 kg)
Width Packed: 27.559"(69.99986 cm)
Height Packed: 29.921"(75.99934 cm)
Depth Packed: 20.866"(52.99964 cm)

Click here to chat!