The Peavey CEL™-2a Compressor works in all live performances and recording applications!
The Peavey CEL-2a compressor can be used as one stereo compressor or two independent compressor. It can also be used as an expander or limiter!
Stereo or dual mono operation Switchable low cut filter on each channel Switchable de-esser on each channel 1/4 inch TRS insert capability Fully adjustable compressor/limiter/expander Full gain reduction metering Input/Output switchable meters
Expander Threshold: -80 dBu to +10 dBu Expander Ratio: 1:1 (off) to 1:5 (gate) Expander Attack: .5 mSec (fixed) Expander Release: 200 mSec (fixed) Compressor Threshold: -40 dBu to +20 dBu Compressor Ratio: 1:1 (off ) to infinite:1 (limit) Compressor Attack: .5 mSec to 100 mSec Compressor Release: .05 sec to 2 sec Limiter Threshold: 0 dBu to +20 dBu (off ) Limiter Attack: .5 mSec (fixed) Limiter Release: 50 mSec (fixed) Gain Recovery: 0 dB to +20 dB Input Impedance: 20k Ohms, XLR connector (1 = g, 2 = +, 3 = -), balanced 20k Ohms, TRS connector (Sleeve = g, Tip = +, Ring = -), balanced 10k Ohms, 1/4” connector (Tip = input, Ring = output), unbalanced T.H.D.: Less than 0.1%‚ 20 Hz–20 kHz (10 Hz–80 kHz BW) Signal to Noise: 97 dB (0 dBu reference level) Frequency Response: 20 Hz–64 kHz (+0 dB/-1 dB) Output Impedance: 100 oHms (XLR and 1⁄4”) Meters: Two 12-segment LED arrays‚ two 10-segment LED arrays‚ two activity LEDs Power Requirements: Domestic: 100–120 VAC 50/60 Hz (15 watts nominal); Export: 230 VAC 50/60 Hz (15 watts nominal)