Free Shipping on orders over 50$

JBL PRX710 2-way In-Ceiling Speaker

For a Limited Time, On Select JBL Speakers Get FREE SHIPPING!

These speakers can do it all!

Availability: Available For Order

$749.00
OR
JBL PRX710 1500W Two-Way Multipurpose Self-Powered Speaker

More Views

Details

Ladies and Gentlemen!  Turn your attention to the JBL PRX710 Two-Way Powered Loudspeaker. 

What you have before you is a speaker ahead of its class.  This speaker has 1500 Watts of raw power making sure you have plenty of headroom even when you need to crank the music.  The PRX710 is sporting a built in DSP unit to make sure you get nothing less than the highest audio quality.  The 10" woofer will be pumping out bass like there is no tomorrow.  Meanwhile, the 1.5" tweeter will keep your higher frequencies crisp and clean.  JBL designed this speaker with YOU in mind.  They put in a 36mm pole socket so you can mount them on a stand, suspension points so you can hang them, and a trapezoid designed enclosure so you can even use them as a floor monitor.  These speakers can do it all!  Whether you are running sound for a church, have a DJ gig, speaking publicly, or need to get a portable PA system for you band, the PRX710 speakers have you covered.  They are armed with a Class-D amplifier eliminating heavy transformers and large heat sinks making them 30% lighter and more efficient than other classes.  Using the XLR thru feature you can link together multiple speakers making it easier than ever to expand your system.  See for yourself how these speakers can take you to the next level.

Additional Information

SKU JB1001
Manufacturer Harman
MPN PRX710
Features

1500W 10" two-way powered loudspeaker system

Technical Specifications

Active or Passive  Active
Design  Bass reflex
Frequency Response  -10 dB normal: 50 to 19,600 Hz
-10 dB boost: 42.9 to 20,000 Hz

±3 dB normal: 63.5 to 18,500 Hz
±3 dB boost: 53 to 18,600 Hz
Coverage Pattern  100 x 60° nominal
Directivity  Index: 9 dB
Factor: 8
Amplifier  Class D
Power Capacity  1500 W (2 x 750)
Maximum Sound Pressure Level (SPL)  133 dB
Crossover  1,900 Hz (DSP Active)
Low Frequency Driver  1 x 10" Differential Drive low distortion low frequency woofer with ferrite magnet
High Frequency Driver  1 x 1.5" neodymium compression driver with annular polymer diaphragm and waveguide
DSP  Dynamic control: dbx Type IV limiter circuit
Signal Indicator  Limit: yellow LED indicates peak output and active DSP limiting
Signal: green LED indicates signal presence
Power/standby: blue LED indicates powered
Power/standby: red LED indicates power saving mode
Enclosure Material  Trapezoidal 18 mm poplar plywood with DuraFlex finish
Input Connections  2 x combo balanced 3-pin XLR female and 1/4" inputs
2 x unbalanced RCA inputs
Output Connections  1 x balanced 3-pin XLR male output
Suspension Support  8 x M10 suspension points
1 x M10 pull back point
Mounting  1 x 36 mm pole socket
Transport and Storage  1 x integrated handle with injection molded backing cup
Dimensions  19.63 x 13.21 x 12.69" (498.7 x 335.6 x 322.3 mm)
Weight  36 lb (16.4 kg)

Dimensions

19.63 " x 13.21 " x 12.69 "


  
Click here to chat!