Free Shipping on orders over 50$

Behringer NU1000DSP Power Amplifier - 150 watts @ 8 Ohms

Behringer NU1000DSP Power Amplifier - 150 watts @ 8 Ohms offers superb power with a ultra light, rack-mountable design!

Revolutionary Class D technology and on board DSP ensure precision sound and long lasting use.

Availability: Available For Order

Behringer NU1000DSP Power Amplifier - 150 watts @ 8 Ohms

More Views


Behringer NU1000DSP power amplifier has carefully been designed and built to offer maximum power with the least effort and put in a package that is ultra light and portable.

Behringer iNUKE series of amps have been fine tuned over years of testing and developing. The outcome is an amp that has carefully been built with parts to allow the amp to react instantly to even the highest demanding bass impulses. The NU1000DSP starts with 1500 watts at 8 Ohms. Weighing under 7 lbs it can be mounted in any rack and still allow you to be portable if needed. It includes a very state of the art Class-D technology which puts out almost no thermal build up.The display on the front is lit up bright and easy to read. Clip lights indicate when when signal is distorted and will help in not overloading your amp. XLR and +" combo jacks allow you to plug any device in to the amp and speak-onÖ connectors ensure any of today's speakers will plug right in to the amp. Amp modes include Dual mono, Stereo, or bridged to meet your specific demands. An on board crossover allows you to power a subwoofer and satellite speaker on the same amp. The iNUKE series is going to give you every bit of power while running with low power consumption and virtually no heat output. Giving you a superb clean sound and no worries about you equipment.

That alone is enough of a reason to purchase an iNuke amplifier. But, the NU1000DSP has on board Digital Signal Processing(DSP). This feature allows those sound engineers who like a little more control to dial in the audio even more. Offering 24-bit/96 kHz convertors to ensure superb signal and a wide dynamic range. DSP functions include high end delay for delay-line loudspeakers, crossover, EQ(8 parametric, 2 dynamic) and dynamics processing with lockable settings so they can not be changed on accident. A LCD panel on the front gives you easy access to setings right on the amplifier. Behringer  has also included a front USB connector on all iNUKE DSP models for setting up , controlling and monitoring from a PC. (Behringer PC remote editor software is available for download at

Additional Information

Manufacturer Behringer
Technical Specifications

Output Power

Maximum Output Power


  • 8 Ω per channel, stereo 160 W
  • Ω per channel, stereo 320 W
  • Ω per channel, stereo 530 W

Bridged mono

  • Ω 570 W
  • Ω 1050 W



  • Ω per channel, stereo 110 W
  • 4 Ω per channel, stereo 210 W
  • Ω per channel, stereo 380 W

Bridged mono

  • Ω 430 W
  • 4 Ω 7500 W




  • Power switch
  • Gain controls (channels A and B)


  • Mode switch (bridge/stereo/mono)
  • Crossover switch (fullrange/100 Hz)



  • Amber/red backlit illuminated
  • Gain controls


  • Limit (per channel) - 0 dB, full scale
  • Signal (per channel) - -24, -12, -6 dB

Digital Signal Processing (DSP)


  • LCD 128 x 32, amber backlit

Digital delay function

  • 0-300ms

Digital crossover function

  • 3 filter types, up to 48dB/octave

Digital EQ function

  • 8 band parametric
  • 2 band dynamic equalizer

Digital Dynamics function

  • Zero attack limiter (peak)


  • 20 total presets
  • 19 user definable



  • 2 x combo jacks

Input impedance

  • 0 k unbalanced,20 k balanced


  • 2  x locking-style professional speaker connectors

Output circuit type

  • Class D


  • <0.1%

Frequency response

  • 20 Hz to 20 kHz, +0 / -1 dB

Damping factor

  • 155 @ 8 O


  • >98 dB

Circuit Protection

  • Cooling Continuously variable speed fan
  • Back-to-front air fl ow

Amplifier protection

  • Thermal and DC protection
  • Stable into reactive
  • Mismatched loads

Load protection

  • On/off muting, DC-fault power

Power Supply, Voltage (Breaker/Fuse)

  • USA / Canada 120 V~, 60 Hz (T 6.3 A H 250 V)
  • UK / Australia / Europe 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
  • Korea / China 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
  • Japan 100 V~, 50/60 Hz (T 6.3 A H 250 V)

  • Power consumption @ 2 O 150 W
  • Power consumption @ 4 O 70 W
  • Mains connector Standard IEC receptacle

  • 3.5" x 19" x 9.76" (89 x 483 x 248 mm)
  • Weight 6.8 lbs / 2.8 kg
  • Delivers 2x500 watts @ 2 Ohms, 2x300 watts @ 4 Ohms, 1000 Watts @ 4Ohms (Bridged)
  • Weighs less than 7 lbs.
  • DSP section features delay, crossover, EQ, dynamics processing, and lockable settings
  • Front panel LCD display allows setup and adjustment w/o PC
  • Can be set up, controlled, and monitores via front usb connector. (Powerful remote software via/
  • Revolutionary cool-running Class-D technology has "near-zero" thermal build up
  • Ultra-efficient switch mode power supply offers noise free audio, super transient response, and low power consumption
    "Zero attack" limiters for maximum output level with overload protection
  • Built in subwoofer/satellite crossover
  • Detented and illuminated gain controls
  • Precise 4 segment signal and limit LED's
  • XLR and 1/4"  TRS combo input connectors
  • Professional Twist lock Speak-on® outputs
  • Independant DC, LF and thermal overload protection on each channel
  • Back to front ventilation system

You may also be interested in the following product(s)

Premium Speakon Speaker Cables - 50 foot

Premium Speakon Speaker Cables - 50 foot

Regular Price: $63.50

Special Price: $38.50

XLR Cable - Grade Good

XLR Cable - Grade Good

Kingdom Versa Pro Loudspeaker - Some Sizes Available in Black or White

Kingdom Versa Pro Loudspeaker - Some Sizes Available in Black or White


Click here to chat!