The BlackMagic Design Intensity Shuttle works as a capture device to send signal to your USB 3.0 devices!
The BlackMagic Design Intensity Shuttle will take video from your camera, convert it and output through USB 3.0 to your live streaming through your computer. The shuttle is compact and portable, it can be taken anywhere. It can output high quality SD or HD video to not only record but stream your services live.
Incredible HDMI Capture and Playback
High Quality Video
SuperSpeed USB 3.0
Analog Video Input - Independent Connections for component and composite and s-video
Analog Video Output - Independent Connections for component and composite and s-video
HDMI Video Input - 1 x HDMI type A connector
HDMI Video Output - 1 x HDMI type A connector
Analog Audio Input - 2 Channel RCA HiFi audio in 24 bit
Analog Audio Output - Channel RCA HiFi audio in 24 bit
HDMI Audio Input - 8 Channels
HDMI Audio Output - 8 Channels
Dual Rate Support - HDMI Analog Component Switches between high definition and standard definition
Device Control - None. FireWire may be used fro controlling some cameras
SD Format Support - 625i/50, 625p PAL and 525i/59.94, 525p NTSC, 480p
HD Format Support - 1080i50, 1080i94, 1080i60, 1080p23.98, 1080o24, 1080p25, 1080p29.97, 1080p30, 720p50, 720p59.94, and 720p60
HDMI Video Sampling - 4:2:2
HDMI Audio Sampling - Television standard sample rate of 49 kHz and 24 bit.
HDMI Color Space - YUV 4:2:2
HDMI Color Precision - 4:2:2
Copy Protection - HDMI input is unable to capture from copy protected HDMI sources. Always confirm copyright ownership before capture or distribution of content.
Colorspace Conversion - Hardware based real time
HD Down Conversion - Software based down conversion during video playback
HD Up conversion - Real time standard definition to 1080HD and 720HD during video capture.
Real Time Effects - Adobe Premiere Pro Mercury Playback Engine effects. Avid Media Composer internal effects.
Software Included - Media Express, Disk Speed Test, BlackMagic System Preferences and BlackMagic Driver
Internal Software Upgrade - Firmware built into software driver. Loaded at system start, or via updater software
Physical Installation - USB 3.0 Requires an x59 based motherboard with onboard USB 3.0, or a USB 3.0 PCI Express card and an x58 or P55 series motherboard. Does not support USB 2.0 capture and playback. Please check the Support pages to see the full system requirements
Operating System Compatibility - Compatible with Microsoft Windows 7 - May not be compatible with Microsoft Windows 8